Glass Processing Machineries

Approx. Rs 9,50,000 / PieceGet Latest Price

Product BrochureProduct Details:

The working principle of the glass sandblasting machine is that the blade in the high-speed rotating drum drives out the sand flow introduced by the tangential line, and the sand particles are accelerated to hit the surface of the plate or glass, and the sand particles collide the surface of the plate and the glass into a microscopic unevenness as a whole. The surface of the glass forms a enamel effect, that is, frosted glass.we are a professional sand blasting machine supply,we sell our glass sand blasting machine all over the world.  The electric box and machine body are separate, independent electric box effectively protect the electrical components and convenient to place, more working face, more convenient to operate machine, finish processing without fingerprint aluminum panel, which is beautiful and generous. The electric box inside electrical components, reasonable layout, convenient installation and maintenance of clear lines of rigorous, Delixi electrical components, reliable quality and long service life and easy conversion mediation play sand conveying speed, speed according to the adjusted low voltage control circuit is safe and reliable, comply with the relevant safety requirements.
The three faces of the upper side of the machine are convenient for the upper part of the work piece.  Working face is the longest in the industry, easy to operate. The main shaft is a solid 40Cr, 1300-1800 70mm, 2000-2200 80m in diameter and diameter of 2600 110mm diameter machining process in strict accordance with the rough turning, heat treatment hardening, straightening, finish turning, grinding, dynamic balance.
The frame structure is reasonable and the overall rigidity is excellent. The vacuum cleaner is 800*800*2200 Screw conveyor with thickness of 3.5mm professional mine wear-resistant materials, wear resistance, long service life. It canlastfor5-8years.
The cutter wheel with 45# steel after the car dynamic balance formed by a tension sleeve is fixed on the main shaft sanding machine spindle assembly overall dynamic calm by professionals with modern equipment for the overall dynamic balance. 
We are the only one who have dynamic balance technology in this field.configuration of machine: 
 Play sand system:
With the high quality iron bearing, TWB and other top brand bearing spinel. The quality is stable and the accuracy is high. 2.40Cr material spindle grinding machine, stable, high precision. 3.8+5m super thick round acrylate,  stronger rigidity.
 SandIng system: 
1. The main body of foot 3MM plate. 
2. All casting pulley. 
3. Special belt brush, durable. 
 Sand lifting system: 
1. Sand prevention with double lifting sand tower. 
2. Both ends of the sand drain box have a sand separation plate, two side bearings have a dust cover, bearing cushion rubber, and the three layer protection prevents the bearing from burning out. 
3. 3M full welded sand bucket, more durable. 
 Sediment leakage system: 
1. The miners special volume 6-3 sand shaft, almost no wear. 
2. 3 layer dust proof structure, low failure rate. 
 Electronic control system: 
1. The frequency converter is quick and easy to operate. 
Main component:
Main motor: Siemens
Bearing: TWB high quality
Brush: Chinese ( specially made)
Electrical element: Delixi
Draught blower: Guangdong Yutong ,domestic first-class brand

Approx. Rs 8,75,000 / PieceGet Latest Price

Product BrochureProduct Details:

Glass straight line edging machine is specialized machine for processing the straight edge of flat glass with arrising, coarse grinding, fine grinding and polishing have been done in one processing travel.

Approx. Rs 17,50,000 / PieceGet Latest Price

Product BrochureProduct Details:

1) XM351A Glass straight line beveling machine are used for grinding bevel and bottom edge of glass with different size and thickness.

2)Rough grinding, fine grinding, polishing of bevel and grinding of bottom edge can be completed in one time.

3) Same thickness of glass sheet can be process continually.

4) The brightness of finished surface will be almost the same as glass itself.

Approx. Rs 5,00,000 / PieceGet Latest Price

Product BrochureProduct Details:

THIS MACHINE COST IS 4,70,000 + GST + TRANSPORT

  PRODUCT CHARACTERISTICS
Material support frame and side baffle, this structure will help us to feed material in machine more better, includingthree pcs support axis and two sets side baffle bearing, we can adjust the position of side baffle bearing follow different material width.
Feed structure is used to control the feeding precision follow the size of shape, Including four sets of feed axis, drive part, pressure adjustment structure.Four sets of feed axis, all of them are connected with servo motor by toothed gear, depends on different thickness material, we can adjust the pressure by hand wheel pressure adjustment structure.there are many different types of material, so we need to get the material sample and change the size of groove follow the cross section of material.
Bending structure will bend aluminum alloy sections follow different curve shapes. Servo motor provide enough power to bend material, when machine is working, servo motor will turn to suitable angle, then machine will start to bend the curve of shape.
Outside metal shell will protect main body of machine. Machine is made of square tube welding framework with pulley, machine can be moved and located, the main body of machine is made of 20mm carbon steel, it is processed by CNC machining center, it will make sure that the drive part is enough good about precision and rigidity, it make machine get high efficiency stable performance and long service life.

Feature SpecificationPower 1.5 KWVoltage 220V ACWeight 450 KgFeed Speed 150 mm/sFeed Accuracy ±0.2 mmBend Axis Torque 200 N:MDie Axis Length 120 mmMinimum Bend Radius 50 mmControl System Autodrive Automatic bending systemMachine Size (LWH) 1302 mm * 780 mm * 1650 mm

Approx. Rs 8,00,000 / PieceGet Latest Price

Product BrochureProduct Details:

THIS MACHINE COST IS 7,80,000 + GST + TRANSPORT 

 PRODUCT CHARACTERISTICS
Automatic Rounding Bending Machine is used to bend aluminum alloy sections, machine is controlled by computer, humanized software has more practical function for customer. Machine software is easy to learn & operate, it is used to process Frame, mirrorframe, Decorativepicture, Ceiling, lamps & lanterns, Advertising, Furniture and metal forming industry.

• FEED STRUCTURE

Feeding axis is made of four sets nylon, Gear drivers Rolling continuous feeding structure, fast speed, for example, if we process a 300mm circle, it just spend 9.84 second.

• MATERIAL HOME FUNCTIONAL

Special design for material detector switch, when material is not enough longer, software will remind you to add new material.

• BEND STRUCTURE

Servo motor provide enough power to bend material, when machine is working, servo motor will turn to suitable angle, then machine will start to bend the curve of shape.

• ONE-BUTTON START FUNCTION

Update the operational procedure, Touch - tone control pattern, when we need to change the dies of aluminum profile, we can save time, more safety, more convenient.

Approx. Rs 3,50,000 / PieceGet Latest Price

Product Details:

TECHNICAL SPECIFICATION

  Glass swing diameter - 100-2000mm
Glass thickness - 3-21mm
Five stars rotary speed - 0.5-2.5r/min
Max. width of bevel edge - 35mm
Air pressure - 0.5-0.8mpa
Vacuum pressure - 0.4mpa
Machine weight -800kg

Power supply - 3P/AC 380V/50HZ,30A
Workbench revolving speed- 0.5-2.5r/min
Bevel edge angle- 0°-25°
Air discharge - 500L/min
Total power(not including the air compressor)- 3kw
Overall dimension(L*W*H)- 1200×1200×2000mm